一种基于代价函数和模糊熵的图像分割方法

提出了一种基于代价函数和模糊熵的图像分割方法.该方法先用代价函数最小化法对退化的图像作预处理,之后,利用模糊熵作进一步的处理.实验结果表明:新方法和一般的阈值分割方法相比,不但分割图像的错分率较小,而且图像的视觉效果也有较大的改善.     

A structured light-based system for human heads

The 3-D modeling of heads by using optical triangulation techniques is of great interest in the context of virtual reality, telecommunication and computer animation. This paper presents a structured light-based system mainly for human heads. It is named “3-D Laser Color Scanner” (3DLCS). A 3-D model is obtained with a cylindrical scan. The laser beam is switched on and off using a “light valve” and two successive CCD frames are captured, one with the laser line showing and one without. We can simplify the laser line extracting by subtracting these two images.In this system, two CCD cameras are used to avoid occlusion problems. Color information is read from the CCD when the laser light is absent. Since traditional laser scanner will miss the range data in the low-reflectance areas such as the hair area of human head, a shape from silhouette algorithm is presented to overcome this problem. Finally, we give some results using our system. The resulting model is suitable for many applications.     

Image Displaying Method of Ground-Based Millimeter Wave Radiometric Imaging System

The image displaying methods used in a millimeter wave radiometric imaging system have great influence on its imaging quality. In order to obtain high quality millimeter wave radiometric images, intensive studies on the image displaying methods are needed. This paper describes the image displaying method of Ground-based 8mm Millimeter Wave Radiometric Imaging (GMWRI) system and compares two different image displaying methods. The experimental results prove the unequal size element arc displaying method fits GMWRI system better.     

Global Optimal Image Reconstruction from Blurred Noisy Data by a Bayesian Approach

In this paper, a procedure is presented which allows the optimal reconstruction of images from blurred noisy data. The procedure relies on a general Bayesian approach, which makes proper use of all the available information. Special attention is devoted to the informative content of the edges; thus, a preprocessing phase is included, with the aim of estimating the jump sizes in the gray level. The optimization phase follows; existence and uniqueness of the solution is secured. The procedure is tested against simple simulated data and real data.     

Quantitative methods for nanopowders characterization

The size, shape and surface topology have a strong influence on powders properties, such as: mechanical, optical, catalytic, etc. In addition, when particles have a nanometer size, the dispersion of these features plays an important role.There are a number of techniques, which could be used in order to characterize powders in terms of particle size and shape. However, due to the scale of analysis, well beyond the wavelength of visible light, most of them cannot be applied for investigations of nanopowders.In this paper, transmission electron microscopy (TEM) image analysis and X-ray methods are presented as promising and complementary techniques. An example of their application to ZrO₂ nanopowder is shown. The advantages and limitations of each method are described.     

Two methods for semi-automated quantification of changes in ventricular volume and their use in schizophrenia

Two semi-automated methods for quantification of ventricular volume change from baseline and follow-up magnetic resonance imaging scans have been developed. Technique 1 employs direct segmentation of the ventricles from both the scans using thresholding and contour extraction. Technique 2 operates on difference images produced by voxel based intensity subtraction of the baseline from the registered follow-up images. Here, all voxels with intensities above a noise threshold and in a restricted area are monitored to compute volumetric changes. In phantom measurements the first technique was accurate to 0.0046%, the second to 0.167% of the phantom volume. Results from normal volunteers was that the average ventricular volume changed by 1.52% and 1.54% for images acquired within 9 months using techniques 1 and 2, respectively. With schizophrenic patients mean change of 10.78% and 9.43% were found employing the first and second procedures, respectively. All measurements agreed with a radiologist’s visual grading of the changes. Robust, objective, fast, easy-to-use, and fairly accurate procedures have been developed and validated to quantify volumetric changes.     

高分辨阿达玛变换显微荧光图像分析(Ⅱ)单细胞DNA荧光图像生成、处理及自动定量分析研究

本研究把荧光显微镜，阿达玛变换多通道成像技术和计算机图象处理技术结合起来，建立了一种单细胞DNA荧光图像自动定量分析系统，对系统的成像原理、信号编码和解码方法及单细胞定量分析方法进行了讨论，分析结果表明，本系统提供的单细胞定量分析数据稳定可靠。     

应用普通扫描仪作薄层色谱定量分析的初步研究

尝试应用普通扫描仪作薄层色谱定量分析。样品通过硅胶板层析展开后，用碘蒸汽显色，再用普通扫描仪记录其图像，通过图像分析技术计算出斑点中样品的量。结果表明，对油醇、油酸、月桂胺和焦谷氨酸油酯等长碳链有机化合物，样点在nmol级的范围内时计算量与实际量有良好的线性相关性。     

Image analysis in the electron microscopy of cellulose protofibrils II. Digital correlation methods

Electron micrographs of parallel arrays of negatively stained ramie cellulose protofibrils were analyzed using the two-dimensional digital autocorrelation function (ACF). The method is based upon the statistical analysis of images in real space. The ACF shows strong parallel streaks of high correlation, and the lateral distance between adjacent streaks allows the mean interfibrillar distance to be estimated as 3.7 nm. The intensity profile along the streaks shows a weak modulation with peaks occurring at integral multiples of 3 or 6 nm. These results provide direct evidence that there is a regular axial texture in the protofibrils, and corroborate the conclusions previously drawn from optical diffraction analysis. Using the difference vectors found in the ACF it has been possible to reduce the picture noise level by linear integration, thereby obtaining an enhanced image. A preliminary result obtained in this way suggests that the projected protofibril morphology associated with the observed axial periodicity is a ribbon-like zigzag structure. Possible applications of the method for future work are discussed.     

Differential thermal analysis of the Al+20% (Fe-50%B) system

In the present study, aluminium and mechanically alloyed (36 h) Fe/B (50 wt%) are mixed. Al+20 (wt%) Fe/B mixture has been studied by differential thermal analysis to determine the aluminium quantity that is supposed to melt and afterwards does not solidify as it reacts with Fe/B powder. The different areas between endothermic reaction (melting peak) and exothermic reaction (solidification peak) allow in knowing the quantity of aluminium that reacts with Fe/B and the amount of intermetallic phases formed at high temperature. In order to follow the process, compacts were sintered at different temperatures (700, 800, 900, 1000 and 1200 °C), in N₂/10H₂/0.1CH₄ atmosphere. Microstructure was evaluated by image analysis and the results obtained by both techniques are compared.